通风帽插头UVCP Venting Cap Plugs UVCP

UVCP-SH系列Ultrabake™通气帽塞设计用于掩盖平面和螺纹螺柱或孔; 在面罩的顶部上有一个小的**，其可以容易地被刺穿或移除以形成小通气孔。 推荐用于粉末涂料，电镀，电镀和阳极氧化。
建议温度高达600°F（315°C）
开口端上的内部唇缘提供了正向密封，以防止油漆和其他污染物渗透到零件上
法兰头使得盖可以轻松地手动移除
屏蔽掉孔或螺柱，并允许截留的空气通过通风口从盖内部逸出
可重复使用
材质：硅胶
标准颜色：各种（颜色编码尺寸）
可选颜色：透明; 白色

UVCP-SH Series Ultrabake™ Venting Cap Plugs are designed to mask plain and threaded studs or holes; there is a small nipple on the top of the mask which can easily be punctured or removed to form the small vent. Recommended for powder coating, e-coating, plating & anodizing.

• Recommended temperatures up to 600°F (315°C)
• Internal lip on the open end provides a positive seal to prevent paint and other contaminants from seeping onto the part
• Flanged head enables the cap to be manually removed with ease
• Masks off the hole or stud and allow trapped air to escape from inside the cap through the vent
• Reusable

Material: Silicone
Standard Color: Various (color-coded for sizing)
Optional Color: Clear; White